A highly diastereoselective pinacol coupling reaction of aldehydes and ketones using low-valence niobium generated from Nb(V)

A simple method for the diastereoselective synthesis of racemic 1,2-diol mediated by low-valence niobium generated in situ is described. A 1,4-dioxane-toluene solvent system was found to be essential to achieve higher selectivities and to prevent other reactions of pinacols, such as deoxygenation and acetal formation. Aromatic aldehydes and ketones were converted to the corresponding pinacols with up to 97 and 85% de, respectively.     

Analysis to obtain precise density fluctuation of supercritical fluids by small-angle X-ray scattering

A procedure of analysis for small-angle X-ray scattering (SAXS) data has been established to obtain density fluctuation of supercritical fluids near the critical point. It is indispensable for the certain analysis to utilize both of high-quality SAXS data measured under stable thermodynamic condition and accurate P–ρ–T data in supercritical region. As a standard example, SAXS measurements have been performed for supercritical CO₂, which is a suitable sample satisfying the condition for both experiment and analysis. The measurements were carried out along four isothermal conditions at reduced temperature of T_r = T/T_c = 1.020, 1.022, 1.043 and 1.064. Comparing the experimental density fluctuation with calculated one from the most reliable equation of state, the differences are within 8% at most.     

Effect of polycondensation methods on molecular weight distribution of nylon 610

Polycondensation methods greatly influence the molecular weight distribution of poly(hexamethylene sebacamide) (nylon 610) as determined by gel permeation chromatography (GPC). The ratio of weight average molecular weight to number average molecular weight (M_w/M_n) was used as a measure for estimating the molecular weight distribution. The M_w/M_n ratios of nylon 610 obtained from melt, solid phase, and high temperature polycondensation methods were 2 to 3.5, which were expected values for the most probable distribution. However, those for polymers obtained from the direct polycondensation in the presence of triphenylphosphine, interfacial polycondensation and low temperature polycondensation using an acid chloride varied over a wide range from 3.5 to 8.5. The effect of the kind of organic solvents in the interfacial method on the M_w/M_n ratios was especially large, and the molecular weight distribution could be controlled to some extent by selecting an appropriate solvent.     

Interpretation of structure formation during the sol-gel transition of a resorcinol-formaldehyde solution by population balance

Growth of colloidal particles formed during the sol-gel transition of a resorcinol-formaldehyde (RF) solution was simulated based on the population balance equation by using the discrete-sectional model (DSM). During the early stage of the sol-gel transition, the transient change of sizes of colloidal particles estimated by this method agreed well with the previous experimental observation by dynamic light scattering (DLS), which confirmed the influence of the catalyst concentration of a starting RF solution on the growth rate of the particles. From the size distribution of colloidal particles predicted at the gelation time, the surface area of a RF hydrogel after the completion of the sol-gel transition was estimated, which coincided with the BET surface area of a RF aerogel because the porous structure of a hydrogel was maintained and few micropores were formed during supercritical drying.     

Formation and stabilization model of the 42-mer Abeta radical: implications for the long-lasting oxidative stress in Alzheimer's disease

Amyloid fibrils mainly consist of 40-mer and 42-mer peptides (Abeta40, Abeta42). Abeta42 is believed to play a crucial role in the pathogenesis of Alzheimer's disease because its aggregative ability and neurotoxicity are considerably greater than those of Abeta40. The neurotoxicity of Abeta peptides involving the generation of free radicals is closely related to the S-oxidized radical cation of Met-35. However, the cation's origin and mechanism of stabilization remain unclear. Recently, structural models of fibrillar Abeta42 and Abeta40 based on systematic proline replacement have been proposed by our group [Morimoto, A.; et al. J. Biol. Chem. 2004, 279, 52781] and Wetzel's group [Williams, A. D.; et al. J. Mol. Biol. 2004, 335, 833], respectively. A major difference between these models is that our model of Abeta42 has a C-terminal beta-sheet region. Our biophysical study on Abeta42 using electron spin resonance (ESR) suggests that the S-oxidized radical cation of Met-35 could be generated by the reduction of the tyrosyl radical at Tyr-10 through a turn structure at positions 22 and 23, and stabilized by a C-terminal carboxylate anion through an intramolecular beta-sheet at positions 35-37 and 40-42 to form a C-terminal core that would lead to aggregation. A time-course analysis of the generation of radicals using ESR suggests that stabilization of the radicals by aggregation might be a main reason for the long-lasting oxidative stress of Abeta42. In contrast, the S-oxidized radical cation of Abeta40 is too short-lived to induce potent neurotoxicity because no such stabilization of radicals occurs in Abeta40.     

Thermal decomposition of vinylacetylene in shock waves

The thermal decomposition of vinylacetylene (C₄H₄) was studied behind reflected shock waves using both a single-pulse method (reaction time between 0.8 and 3.3 ms) and a time-resolved UV-absorption method (230 nm). The studies were done over the temperature range of 1170–1690 K at the total pressure range of 1.3–2.3 atm. The mechanism was used to interpret both the early and late stages of vinylacetylene decomposition at the high temperatures. It was confirmed that C₄H₄ dissociation proceeded through the following three channels. The rate constant expression of reaction (1) was determined as k₁ = 6.3 × 10¹³ exp(?87.1 kcal/RT) s^?1. The rate constants of the succeeding reactions (chain reaction, C₄H₄ + H → i-C₄H₃ + H₂ and C₄H₄ + H → C₂H₂ + C₂H₃ and decomposition reactions of free radicals, i-C₄H₃ + M → C₄H₂ + H + M) were confirmed or estimated. © John Wiley & Sons, Inc.     

Fluorescence immunological determination of immunoglobulin G in human serum by high-performance liquid gel-permeation chromatography

Summary A high-performance liquid gel-permeation chromatographic method is described for the determination of human serum immunoglobulin G (IgG) by separating the fluorescent immuno complex from the free fluorescence-labeled antibody. Fluorescence-labeled antibody used in this study was fluorescein isothiocyanate (FITC)-labeled Fab fragment goat anti-human IgG (anti-IgG Fab). Immuno complexes and antibody of different molecular sizes can be separated. FITC-labeled anti-IgG Fab was added to the serum and the mixture is passed through the column. An immuno complex separates as well-delineated peak in the column void volume, and was measured by the fluorescence of the column eluate (Ex=490nm, Em=520nm). The total analysis time for a serum sample was approximately 15min. The minimum detection limit was 25 mg/dl. The relative standard deviation was below 2% (peak area). The results of the HPL-GPC analysis correlate well with those obtained by laser nephelometric assay (r=0.992).     

Conversion electron Mössbauer spectroscopy using a CAMAC data acquisition system (KODAQ)

For simple depth selective conversion electron Mössbauer spectroscopy (CEMS) by using a He+CH₄ proportional counter, a flexible and versatile CAMAC data acquisition system (KODAQ) which works on a popular Japanese personal computer PC9801VX (NEC) was applied. It is demonstrated that CEM spectra of the oxidized Fe thin film which is composed of Fe₃O₄, Fe_1–xO and -Fe metal are successfully obtained.     

o-Phenylene halocarbenonitrenes and o-phenylene chlorocarbenocarbene: a combined experimental and computational approach

[reaction: see text] Computations find that o-phenylene(halo)carbenonitrenes 2-XN, X = F, Cl, Br, have quinoidal singlet biradical ground states such as the parent o-phenylenecarbenonitrene (2-HN). Compared to the parent 2-HN, halogen substitution stabilizes the A' states relative to the A' ones. Halogen substitution also affects the barrier and exothermicity of the ring-opening reaction (to form unsaturated nitriles 4-XN, X = F, Cl, Br), but it has a smaller effect on the ring-closing reaction (to form benzo(aza)cyclobutadiene 3-XN, X = F, Cl, Br). Attempts to generate and observe the o-phenylene(halo)carbenonitrenes 2-XN, X = F, Cl, Br, using matrix isolation spectroscopy under conditions similar to those of the successful observation of 2-HN failed. Instead, the observed photoproducts were a mixture of 3-XN and 4-XN. In each case, the major product of the mixture appears to be the thermodynamically more stable one. In the case of X = Br, the observed mixture contains an additional component that is postulated to be Z-6-BrN. o-Phenylenechlorocarbenocarbene is also computed to have a quinoidal singlet biradical ground state and relatively stabilized A' excited states. Attempts to generate the biscarbene under matrix isolation conditions led to the detection of benzochlorocyclobutadiene (3-ClC), small amounts of the ring-open product (dienediyne 4-ClC), and cycloalkyne 5-ClC. Computations suggest that the formation of 5-ClC implies the generation of Z-6-ClC, which is analogous to the formation of Z-6-BrN from 2-BrN.     

Transformation of thioacetals to cyclopropanes

Cyclopropanes were obtained by the titanocene(II)-promoted reaction of thioacetals with vinyl pivalate. It was also found that vinycyclopropanes were produced by a similar treatment of thioacetals with the titanocene(II) species in the presence of 1,3-dienes.